Spare face mask holder

 To make the small bag, you will need two pieces of fabric, one for the lining and one for the outside, and iron on stabiliser for the fabrics. Approximately 12 inches by 7 inches, 5 inches of tape or cord, a key ring clip, cam snap.

. 1. Download and cut out 2 pieces, 1 for the lining and 1 for the main. iron on interfacing on both pieces.

2. Place the two pieces of fabric, right sides together and stitch along the bottom edge - 1/2 inch seam allowance used throughout. 

3. Turn the pieces round. Press. Topstitch along the edge.

4. Open up the work so that it lays flat on the table, with the lining at the top. 

5. Bring the folded/topstitched part towards the top, stopping where the closing flap is going to be. 

6. Once you have worked out where the opening will be, place the tape, just below the topstitch line and pin. 

7. Bring the rest of the fabric over until it covers the other part entirely. 

8. Pin all round and leave a gap for turning, along the top part. 

9. Stitch all around, leaving the gap unstitched. 

10. Trim the excess fabric, leaving the turning gap untrimmed.

11. Turn the bag .

12. Push out the corners. Sew the gap. 

13. Turn the bag the right way round. Press. And cam snap. 

The bag is done!

mask holder